Table of Contents
Advertisement
scope
Syntax
scope {exclusive | template}
no scope
Context
config>qos>sap-egress
Description
This command configures the scope as exclusive or template.
The no form of this command sets the scope of the policy to the default of template.
Default
template
Parameters
exclusive — When the scope of a policy is defined as exclusive, the policy can only be applied to one inter-
face. If a policy with an exclusive scope is assigned to a second interface an error message is generated.
If the policy is removed from the exclusive interface, it will become available for assignment to another
exclusive interface.
template — When the scope of a policy is defined as template, the policy can be applied to multiple inter-
faceports on the router.
Default QoS policies are configured with template scope. An error is generated if you try to modify the
scope parameter from template to exclusive scope on default policies.
Operational Commands
copy
Syntax
copy sap-egress <src-pol> <dst-pol> [overwrite]
Context
config>qos
Description
This command copies the existing SAP egress QoS policy entries to another SAP egress QoS
policy.
The copy command is a configuration level maintenance tool used to create new policies using
existing policies. It also allows bulk modifications to an existing policy with the use of the
overwrite keyword.
If the destination policy already exists, the key word overwrite must be specified.
Parameters
src-pol — Specifies the source policy.
Values
src-pol — Specifies the destination policy.
Values
Page 344
1—65535
1—65535
7210 SAS-X and 7210 SAS-R6 OS Quality of Service Guide
Advertisement
Table of Contents
