Table of Contents
Advertisement
It is possible that a SAP ingress policy includes the dscp map command, the dot1p map command, and an
IPv6 match criteria. When multiple matches occur for the traffic, the order of precedence is used to arrive at
the final action. The order of precedence is as follows:
1. 802.1p bits
2. DSCP
3. IP Quintuple or MAC headers
The no form of this command removes the match criteria for the entry-id.
Parameters
next-header next-header — Specifies the next meader to match.
The protocol type such as TCP / UDP / OSPF is identified by its respective protocol number. Well-
known protocol numbers include ICMP(1), TCP(6), UDP(17).
Values
7210 SAS-X and 7210 SAS-R6 OS Quality of Service Guide
protocol numbers accepted in DHB: 0 — 42, 45 — 49, 52 — 59, 61 — 255
keywords:
none, crtp, crudp, egp, eigrp, encap, ether-ip, gre, icmp, idrp, igmp, igp,
ip, ipv6, ipv6-icmp, ipv6-no-nxt, isis, iso-ip, l2tp, ospf-igp, pim, pnni, ptp, rdp, rsvp, stp,
tcp, udp, vrrp
* — udp/tcp wildcard
Operational Commands
Page 289
Advertisement
Table of Contents
