Table of Contents
Advertisement
Basic Configurations
Using the above equation, the total classification entries used = 20 and meters used = 7, num-qos-
classifiers to use is 20 (the minimum value).
If the same policy were to be used for a SAP in an Epipe service, then since all traffic is classified
to a unicast traffic type and since only unicast meters are used, the following:
FCnc = 1 + 0 + 0 + 0 = 1
FCh1 = 1 + 0 + 0 + 0 = 1
FCef = 1 + 0 + 0 + 0 = 1
FCh2 = 1 + 0 + 0 + 0 = 1
FCl1 = 1 + 0 + 0 + 0 = 1
FCaf = 1 + 0 + 0 + 0 = 1
FCl2 = 0 + 0 + 0 + 0 = 0
FCbe = 1 + 0 + 0 + 0 = 1
Using the above equation, the total classification entries used = 7 and meters used = 4.
As can be seen here, using the same policy for Epipe SAP can lead to inefficient use of resources.
Hence, it is recommended to create a different policy with the required number of resources (that
is,with num-qos-classifiers 8).
Example 5
sap-ingress 10 create
description"example-policy-3"
num-qos-classifiers 32
meter 1 create
exit
meter 11 multipoint create
exit
meter 3 create
exit
meter 2 create
exit
meter 4 create
exit
meter 5 create
exit
meter 6 create
exit
meter 8 create
exit
scope template
default-fc be
fc
Page 240
7210 SAS-X and 7210 SAS-R6 OS Quality of Service Guide
rate cir100 pir 100
rate cir 1 pir 20
rate cir 100 pir 100
rate cir 1 pir 20
rate cir 10 pir 100
rate cir 10 pir 10
rate cir 11 pir 100
rate cir 20 pir 100
af create
Advertisement
Table of Contents
