Table of Contents
Advertisement
Service Meter QoS Policy Commands
DSCP
FC
Src MAC
Dst MAC
Dot1p
Ethernet-type
FC
Service Association
Service-Id
Customer-Id
SAP
Classifiers
required
Meters required
Sample Output
*A:Dut-G# show qos sap-ingress 100 detail
===============================================================================
QoS Sap Ingress
===============================================================================
-------------------------------------------------------------------------------
Sap Ingress Policy (100)
-------------------------------------------------------------------------------
Policy-id
Default FC
Criteria-type
Sub-Criteria-type
Accounting
Classifiers Allowed
Classifiers Reqrd (VPLS)
Classifiers Reqrd (EPIPE) : 8
Page 304
7210 SAS-X and 7210 SAS-R6 OS Quality of Service Guide
Label
Specifies a DiffServ Code Point (DSCP) name used for an
ingress SAP QoS policy match.
Specifies the entry's forwarding class.
Specifies a source MAC address or range to be used as a Service
Ingress QoS policy match.
Specifies a destination MAC address or range to be used as a
Service Ingress QoS policy match.
Specifies a IEEE 802.1p value to be used as the match.
Specifies an Ethernet type II Ethertype value to be used as a
Service Ingress QoS policy match.
Specifies the entry's forwarding class.
The unique service ID number which identifies the service in the
service domain.
Specifies the customer ID which identifies the customer to the
service.
Specifies the a Service Access Point (SAP) within the service
where the SAP ingress policy is applied.
Indicates the number of classifiers for a VPLS or Epipe service.
Indicates the number of meters for a VPLS or Epipe service.
: 100
: be
: MAC
:dot1p-only
: packet-based
: 16
: 16
Description (Continued)
Scope
Meters Allowed
Meters Reqrd (VPLS)
Meters Reqrd (EPIPE) : 8
: Template
: 8
: 9 Exceeded
Advertisement
Table of Contents
