Table of Contents
Advertisement
remark
Syntax
[no] remark <policy-id>
Context
config>qos>sap-egress
Description
This command associates the specified remark policy with this SAP. Remark policies of type
dot1p and dot1p-lsp-exp-shared can be specified. It allows the users to specify the dot1p values to
use for marking the ethernet header fields of the packets sent out through this SAP.
The no form of the command associates the default the remark policy "2" with this SAP.
remarking
Syntax
[no] remarking
Context
config>qos>sap-egress
Description
This command is used to enable or disable remarking on service egress.
When remarking is enabled, the remark policy configured is used to determine the FC to QoS bit
(For example: Dot1p or DSCP or EXP, based on the remark policy configured and egress packet
encapsulation) mapping. Please refer to the remark policy supported for different service entities
in Remark policies Chapter.
The no form of the command disables remarking on service egress.
sap-egress
Syntax
sap-egress <policy-id> [create]
Context
config>qos
Description
This command enables the context to configure a SAP Egress policy. The SAP egress policy
determines the QoS treatment to packets at service egress.
The system creates and associates eight queues to each of the SAPs in the system. User cannot
create or delete a queue. SAP egress policy allows the user to define the queue parameters for the
eight queues.
Default
1
Parameters
policy-id — The ID of the SAP Egress policy
Values
7210 SAS-X and 7210 SAS-R6 OS Quality of Service Guide
1 — 65535
Page 343
Advertisement
Table of Contents
