Table of Contents
Advertisement
The no form of this command returns all queues created with the queue-id by association with the
QoS policy to the default PIR and CIR parameters (max, 0).
Default
rate cir 0 pir max — The max default specifies the amount of bandwidth in kilobits per second
(thousand bits per second). The max value is mutually exclusive to the pir-rate value.
Parameters
cir cir-rate-in-kbps — The cir parameter overrides the default administrative CIR used by the queue. If the
rate command is not executed or the cir parameter is not explicitly specified, the default CIR value is
used.
Values
Default
pir pir-rate-in-kbps — Defines the administrative PIR rate, in kilobits, for the queue. When the rate
command is executed, a PIR setting is optional. If the rate command is not executed, the default PIR of
maximum value is used.
Values
Default
weight
Syntax
[no] weight weight
Context
config>qos>sap-egress>queue
config>qos>network-queue>queue
Description
Allows users to specify the weight of the queue when the queue-mode is set to weighted.
For queues configured in weighted mode, the CIR of the queues are met if bandwidth is available
and the configured weights are considered in the PIR loop. The configured weight determines the
proportion of available bandwidth that is given to this queue in comparison to other queues
configured in weighted mode.
The no form of the command sets the weight to default of one.
Default
1
weight — Specifies the value for the weight parameter. The vaulue is an integer value which specifies the
Parameters
proportion of available bandwidth to be allocated to this queue relative to other queues.
Values
Page 342
0 — 10000000, max
0
1 — 10000000, max
max
1 — 15
7210 SAS-X and 7210 SAS-R6 OS Quality of Service Guide
Advertisement
Table of Contents
