Alcatel-Lucent 7210 SAS-R6 OS Quality Of Service Manual page 138

Network Ingress QoS Policy Commands
Network Ingress QoS Policy Commands
ingress
Syntax ingress
Context config>qos>network policy-id
Description This command is used to enter the CLI node that creates or edits policy entries that specify the to
forwarding class mapping packets.
When pre-marked packets ingress on a network port, the QoS treatment through the 7210 SAS-
based on the mapping defined under the current node.
default-action
Syntax default-action fc fc-name [profile {in | out | use-dei }]
Context config>qos>network>ingress
Description This command defines or edits the default action to be taken for packets that have an undefined
LSP EXP bits set. The default-action command specifies the forwarding class to which such
packets are assigned.
Multiple default-action commands will overwrite each previous default-action command.
Default
default-action fc be profile out
Parameters
fc fc-name — Specify the forwarding class name. All packets with LSP EXP or dot1p bits bits that is not
defined will be placed in this forwarding class.
Default
Values
profile {in | out} — All packets that are assigned to this forwarding class will be considered in or out of
profile based on this command. , on network ingress, the meter/policer supports color-aware policing/
metering. The value of the profile parameter is used to provide the color to the meter. Value of 'in'
indicates 'Green' color OR in-profile packet to the meter and value of 'out' indicates 'Yellow' color OR
out-of-profile packet to the meter operating in color-aware mode. Based on the configured meter rates,
the final profile for the packet is determined. The final color is used for subsequent processing of the
packet in the system. On egress, in case of congestion, the in-profile packets are preferentially queued
over the out-of-profile packets. The profile can be specified in 3.0 release.
Page 138 7210 SAS-X and 7210 SAS-R6 OS Quality of Service Guide
None, the fc name must be specified
be, l2, af, l1, h2, ef, h1, nc