Table of Contents
Advertisement
Basic Configurations
Basic Configurations
A basic network queue QoS policy must conform to the following:
•
•
Create a Network Queue QoS Policy on 7210 SAS-X
Configuring and applying QoS policies other than the default policy is optional. A default network
queue policy is applied to all network ports.
To create an network queue policy, define the following:
•
•
•
Use the following CLI syntax to create a network queue QoS policy:
Network Queue FC
CLI Syntax: config>qos
*A:SAS-X>config>qos>network-queue# info detail
----------------------------------------------
Page 168
7210 SAS-X and 7210 SAS-R6 OS Quality of Service Guide
Each network queue QoS policy must have a unique policy name.
Queue parameters can be modified, but cannot be deleted.
Enter a network queue policy name. The system will not dynamically assign a name.
Include a description. The description provides a brief
FCs are mapped to 8 queues available at the port according to
to Queue-ID Map, on page
network-queue policy-name
description description-string
queue queue-id
rate cir cir-percent [pir pir-percent]
adaptation-rule [cir adaptation-rule] [pir adaptation-
rule]
[no] port-parent cir-level <cir-level 1-8> pir-weight
<pir-weight 1-100>
[no] queue-mgmt
description "Default network queue QoS policy."
queue 1
port-parent cir-level 1 pir-weight 1
rate cir 0 pir 100
adaptation-rule cir closest pir closest
queue-mgmt "default"
exit
queue 2
port-parent cir-level 2 pir-weight 1
rate cir 25 pir 100
adaptation-rule cir closest pir closest
queue-mgmt "default"
69.
<queue-mgmt policy-name>
overview of policy features.
Table 27, Forwarding Class
Advertisement
Table of Contents
