Table of Contents
Advertisement
Since this FC uses unicast, broadcast and multicast meter, three entries are needed to identify these
traffic types explicitly. Unknown-unicast traffic type is classified using the same entry as multicast
traffic type and uses the same meter.
Using the equation, calculate the total classification entries used by this policy, as follows
TC = (0 * 0)nc + (0 * 0)h1 + (0 * 0)ef + (0 * 0)h2 + (0 * 0)l1 + (3 * 2)af + (0 * 0)l2 + (1 *
3)be = 9
The number of meters used in this policy = 4.
Hence, in this example
If the same policy were to be used for a SAP in an Epipe service, then since all traffic is classified
to a unicast traffic type and since only unicast meters are used, the following:
FCnc = 0 + 0 + 0 + 0 = 0
FCh1 = 0 + 0 + 0 + 0 = 0
FCef = 0 + 0 + 0 + 0 = 0
FCh2 = 0 + 0 + 0 + 0 = 0
FCl1 = 0 + 0 + 0 + 0 = 0
FCaf = 1 + 0 + 0 + 0 = 1
FCl2 = 0 + 0 + 0 + 0 = 0
FCbe = 1 + 0 + 0 + 0 = 1
Using the equation, calculate the total classification entries used by this policy, as follows:
(0 * 0)nc + (0 * 0)h1 + (0 * 0)ef + (0 * 0)h2 + (0 * 0)l1 + (3 * 1)af + (0 * 0)l2 + (1 * 1)be = 4
The number of meters used in this policy = 2.
Example 9
sap-ingress 10 create
num-qos-classifiers 256
meter 1 create
exit
meter 11 multipoint create
exit
meter 3 create
exit
meter 4 create
exit
fc be create
exit
fc af create
exit
default-fc be
7210 SAS-X and 7210 SAS-R6 OS Quality of Service Guide
num-qos-classifiers 16
meter 1
broadcast-meter 11
mulitcast-meter
4
meter 3
broadcast-meter 11
multicast-meter
4
Service Ingress QoS Policies
is used (i.e. maximum of (9, (2 * 4))).
Page 247
Advertisement
Table of Contents
