Alcatel-Lucent 7210 SAS-R6 OS Quality Of Service Manual page 340

queue-id — Specifies the id of the queue.
Parameters
Values
create — Mandatory keyword to create a network queue policy.
queue
Syntax queue queue-id
Context config>qos>sap-egress
Description This command is used to configure the queue parameters.
This command creates the context to modify Queue parameters associated with a particular queue.
The queue is identifiable by queue-id and FCs are mapped into the queues according to
Forwarding Class to Queue-ID Map, on page
The no form of this command is weighted.
Default none
Parameters queue-id — Specifies the id of the queue. Specifies the access egress queue-id associated with an FC
according to
Values
queue-mgmt
Syntax [no] queue-mgmt name
Context config>qos>sap-egress>queue
config>qos>sap-ingress>queue
Description
This command associates the specified queue management policy with this queue.
The queue management policy is used to specify the queue buffer parameters and queue slope
policy parameters.
The no form of the command associates the default SAP egress queue management policy with
this queue.
Parameters
name — The name of the queue management policy
Values
Page 340
1 — 8
Table 27, Forwarding Class to Queue-ID Map, on page 69
1 — 8
1—32 characters
7210 SAS-X and 7210 SAS-R6 OS Quality of Service Guide
69.
Table 27,
.