Table of Contents
Advertisement
meter
Syntax
meter meter-id
no meter
Context
config>qos>network>ingress>fc
Description
This command overrides the default unicast forwarding type meter mapping for fc fc-name. The
specified meter-id must exist within the policy as a non-multipoint meter before the mapping can
be made. Once the forwarding class mapping is executed, all unicast traffic on a port using this
policy is forwarded using the meter-id.
The no form of this command sets the unicast (point-to-point) meter-id back to the default meter
for the forwarding class (meter 1).
Default
meter 1
Parameters
meter-id — Specifies the meter-id. The specified parameter must be an existing, non-multipoint meter
defined in the config>qos>network>ingress context.
Values
multicast-meter
Syntax
multicast-meter meter-id
no multicast-meter
Context
config>qos>network>ingress>fc
Description
This command overrides the default multicast forwarding type meter mapping for fc fc-name. The
specified meter-id must exist within the policy as a multipoint meter before the mapping can be
made. Once the forwarding class mapping is executed, all multicast traffic on a port using this
policy is forwarded using the meter-id.
This command can only be used with a network policy of type ip-interface.
The no form of the command sets the multicast forwarding type meter-id back to the default meter
for the forwarding class.
Default
9
Parameters
meter-id — Specifies the multicast meter. The specified parameter must be an existing, multipoint meter
defined in the config>qos>network>ingress context.
Values
7210 SAS-X and 7210 SAS-R6 OS Quality of Service Guide
1 — 12
1— 12
Operational Commands
Page 141
Advertisement
Table of Contents
