Alcatel-Lucent 7210 SAS-R6 OS Quality Of Service Manual page 278

Service Ingress QoS Policy Commands
scope
Syntax scope {exclusive | template}
no scope
Context config>qos>sap-ingress policy-id
Description
This command configures the Service Ingress QoS policy scope as exclusive or template.
The no form of this command sets the scope of the policy to the default of template.
Default template
Parameters
exclusive — When the scope of a policy is defined as exclusive, the policy can only be applied to one SAP.
If a policy with an exclusive scope is assigned to a second SAP an error message is generated. If the
policy is removed from the exclusive SAP, it will become available for assignment to another exclusive
SAP.
template — When the scope of a policy is defined as template, the policy can be applied to multiple SAPs
on the router.
Default QoS policies are configured with template scopes. An error is generated when the template
scope parameter to exclusive scope on default policies is modified.
default-fc
Syntax default-fc fc [profile {in|out|use-dei}]
Context config>qos>sap-ingress
Description
This command configures the default forwarding class for the policy. In the event that an ingress packet does
not match a higher priority (more explicit) classification command, the default forwarding class will be
associated with the packet. Unless overridden by an explicit forwarding class classification rule, all packets
received on an ingress SAP using this ingress QoS policy will be classified to the default forwarding class.
The use-dei parameter is used to enable use of DEI bits for assigning ingress profile/color to the packet. If
use-dei is enabled, then the packet is assigned in-profile/green if the DEI bit is 0 and the packet is assigned
out-of-profile/yellow if the DEI bit is 1. If use-dei is disabled, the DEI bits are not used to assign ingress
profile and user has an option to assign in/out profile based on the QoS bits in the packet header.
The default forwarding class is best effort (be). The default-fc settings are displayed in the show
configuration and save output regardless of inclusion of the detail keyword.
Default
be
Parameters
fc — Specify the forwarding class name for the queue. The value given for fc must be one of the predefined
forwarding classes in the system.
Values
profile {in | out | use-dei} — The profile assignment action is optional. When specified, packets matching
the classification entry will be explicitly classifier to either in-profile or out-of-profile. The remove the
profile action for an classification entry, the action command must be re-executed without the profile
Page 278 7210 SAS-X and 7210 SAS-R6 OS Quality of Service Guide
be | l2 | af | l1 | h2 | ef | h1 | nc