Table of Contents
Advertisement
Service Ingress QoS Policy Entry Commands
match
Syntax
[no] match [protocol protocol-id]
Context
config>qos>sap-ingress>ip-criteria>entry
Description
This command creates a context to configure match criteria for SAP QoS policy match criteria. When the
match criteria have been satisfied the action associated with the match criteria is executed.
Only a single match criteria (either MAC or IP) is allowed at any point of time.
Parameters
protocol protocol-id — Specifies an IP protocol to be used as a SAP QoS policy match criterion.
The protocol type such as TCP / UDP / OSPF is identified by its respective protocol number. Well-
known protocol numbers include ICMP(1), TCP(6), UDP(17).
Values
match
Syntax
match
no match
Context
config>qos>sap-ingress>mac-criteria>entry
Description
This command creates a context for entering/editing match MAC criteria for ingress SAP QoS policy match
criteria. When the match criteria have been satisfied the action associated with the match criteria is
executed.
If more than one match criteria (within one match statement) are configured then all criteria must be
satisfied (AND function) before the action associated with the match will be executed.
A match context can consist of multiple match criteria, but multiple match statements cannot be entered per
entry.
The no form of the command removes the match criteria for the entry-id.
match
Syntax
match [next-header next-header]
no match
Context
config>qos>sap-ingress>ipv6-criteria>entry
Description
This command creates a context to configure match criteria for ingress SAP QoS policy match IPv6 criteria.
When the match criteria have been satisfied the action associated with the match criteria is executed.
If more than one match criteria (within one match statement) are configured, then all criteria must be
satisfied (AND function) before the action associated with the match is executed.
A match context can consist of multiple match criteria, but multiple match statements cannot be entered per
entry.
Page 288
7210 SAS-X and 7210 SAS-R6 OS Quality of Service Guide
0 — 255
Advertisement
Table of Contents
