Table of Contents
Advertisement
Parameters
dot1p |lsp-exp value —
Values
dot1p-lsp-exp-out-profile
Syntax
dot1p-lsp-exp-out-profile dot1p | lsp-exp value
no dot1p-lsp-exp-out-profile
Context
config>qos>remark>fc
Description
This command specifies the in-profile Dot1p LSP EXP value for the forwarding class. This value
is used for all out-of-profile LSP labeled packets which require marking the egress on the
forwarding class queue.
When multiple Dot1p LSP EXP values are associated with the forwarding class at network egress,
the last name entered overwrites the previous value.
The no form of the command reverts to the factory default in-profile Dot1p LSP EXP setting.
Parameters
dot1p | lsp-exp value —
Values
Page 400
A 3-bit Dot1p LSP EXP bit value, expressed as a decimal integer.
0 — 7
A 3-bit Dot1p LSP EXP bit value, expressed as a decimal integer.
0 — 7
7210 SAS-X and 7210 SAS-R6 OS Quality of Service Guide
Advertisement
Table of Contents
