Table of Contents
Advertisement
unknown-meter
Syntax
unknown-meter meter-id
no unknown-meter
Context
config>qos>sap-ingress>fc
Description
This command overrides the default unknown unicast forwarding type meter mapping for fc fc-name. The
specified meter-id must exist within the policy as a multipoint meter before the mapping can be made. Once
the forwarding class mapping is executed, all unknown traffic on a SAP using this policy is forwarded using
the meter-id.
The unknown forwarding type usually tracks the multicast forwarding type definition. This command
overrides that default behavior.
The no form of this command sets the unknown forwarding type meter-id back to the default of tracking the
multicast forwarding type meter mapping.
Parameters
meter-id — Specifies an existing multipoint meter defined in the config>qos>sap-ingress context.
Values
Default
7210 SAS-X and 7210 SAS-R6 OS Quality of Service Guide
1— 32
11
Operational Commands
Page 285
Advertisement
Table of Contents
