Alcatel-Lucent 7210 SAS-R6 OS Quality Of Service Manual page 291

Values
dst-port
Syntax dst-port fc {eq} dst-port-number
dst-port range start end
no dst-port
Context config>qos>sap-ingress
config>qos>sap-ingress>ip-criteria>entry>match
Description
This command configures a destination TCP or UDP port number or port range for a SAP QoS policy match
criterion.
The no form of this command removes the destination port match criterion.
Default
none
Parameters
eq dst-port-number — The TCP or UDP port numbers to match specified as equal to (eq) to the destination
port value specified as a decimal integer.
Values
range start end — The range of TCP or UDP port values to match specified as between the start and end
destination port values inclusive.
Values
fragment
Syntax fragment {true | false}
no fragment
Context config>qos>sap-ingress>ip-criteria>entry>match
Description
This command configures fragmented or non-fragmented IP packets as a SAP QoS policy match criterion.
The no form of this command removes the match criterion.
Default
fragment false
Parameters
true — Configures a match on all fragmented IP packets. A match will occur for all packets that have either
the MF (more fragment) bit set OR have the Fragment Offset field of the IP header set to a non-zero
value.
false — Configures a match on all non-fragmented IP packets. Non-fragmented IP packets are packets that
have the MF bit set to zero and have the Fragment Offset field also set to zero.
7210 SAS-X and 7210 SAS-R6 OS Quality of Service Guide
d: [0..255]D
ipv6-prefix-length: 0 -- 128
netmask Specifies the subnet mask in dotted decimal notation.
0.0.0.0 - 255.255.255.255
1 — 65535 (decimal hex or binary)
1 — 65535 (decimal hex or binary)
Operational Commands
Page 291