Remove A Policy From The Qos Configuration; Copying And Overwriting Network Policies - Alcatel-Lucent 7210 SAS-R6 OS Quality Of Service Manual

Service Management Tasks

Remove a Policy from the QoS Configuration

To delete a network policy, enter the following commands:
CLI Syntax: config>qos# no network network-policy-id

Copying and Overwriting Network Policies

You can copy an existing network policy to a new policy ID value or overwrite an existing policy
ID. The
exists.
CLI Syntax: config>qos# copy network source-policy-id dest-policy-id
[overwrite]
The following output displays the copied policies:
A:ALA-12>config>qos# info detail
---------------------------------------------
...
...
...
...
---------------------------------------------
A:ALA-12>config>qos#
Page 116 7210 SAS-X and 7210 SAS-R6 OS Quality of Service Guide
option must be specified or an error occurs if the destination policy ID
overwrite
network 1 create
description "Default network QoS policy."
scope template
ingress
default-action fc be profile out
network 600 create
description "Default network QoS policy."
scope template
ingress
default-action fc be profile out
network 700 create
description "Default network QoS policy."
scope template
ingress
default-action fc be profile out