Table of Contents
Advertisement
Parameters
ip-address | ipv6-address — The IP or IPv6 address of the source IP interface. This address must be unique
within the subnet and specified in dotted decimal notation.
Values
Values
Values
mask — The subnet mask length, expressed as an integer or in dotted decimal notation.
Values
netmask — Specify the subnet mask in dotted decimal notation.
Values
src-port
Syntax
src-port {eq} src-port-number
src-port range start end
no src-port
Context
config>qos>sap-ingress>ip-criteria>entry>match
Description
This command configures a source TCP or UDP port number or port range for a SAP QoS policy match
criterion.
The no form of this command removes the source port match criterion.
Default
No src-port match criterion.
Parameters
eq src-port-number — The TCP or UDP port numbers to match specified as equal to (eq) to the source port
value specified as a decimal integer.
Values
range start end — The range of TCP or UDP port values to match specified as between the start and end
source port values inclusive.
Values
7210 SAS-X and 7210 SAS-R6 OS Quality of Service Guide
ip-address:
a.b.c.d
mask:
1 — 32
netmask
a.b.c.d (dotted quad equivalent of mask length)
ipv4-prefix: a.b.c.d
ipv4-prefix-length: 0 -- 32
ipv6-prefix: x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x: [0..FFFF]H
d: [0..255]D
ipv6-prefix-length: 0 -- 128
netmask
Specifies the subnet mask in dotted decimal notation.
0.0.0.0 - 255.255.255.255
0 — 32
a.b.c.d (dotted quad equivalent of mask length)
1 — 65535 (decimal hex or binary)
1 — 65535 (decimal hex or binary)
Operational Commands
Page 293
Advertisement
Table of Contents
