Table of Contents
Advertisement
Port
CIR Level
PIR Weight
QueueId
State
Start Avg
Max Avg
Max Prob
QueueId
CBS
MBS
Time Average Fac-
tor
Queue-Mgmt
Service-Id
Page 348
Indicates if the parent scheduler is port scheduler or not.
Displays the priority of the queue in the CIR loop.
Displays the weight of the queue used in the PIR loop.
Displays the Queue identifier associated with the sap-egress
QoS policy.
Displays the state of the queue. The state of the queue can be
either "Up" or "Down"
Specifies the low priority or high priority RED slope position for
the shared buffer average utilization value where the packet dis-
card probability starts to increase above zero.
Specifies the percentage of the shared buffer space for the buffer
pool at which point the drop probability becomes "1".This
parameter is expressed as a decimal integer.
Specifies the high priority RED slope position for the maximum
non-one packet discard probability value before the packet dis-
card probability rises directly to one.
Burst Sizes and Time Average Factor
Displays the Queue identifier associated with the sap-egress
QoS policy
Displays the configured CBS value
Displays the configured MBS value
Displays the value of the time average factor in use
Displays the Queue management policy in use
The unique service ID number which identifies the service in the
service domain.
7210 SAS-X and 7210 SAS-R6 OS Quality of Service Guide
High Slope/Low slope
Service Associations
Advertisement
Table of Contents
