fc
Syntax
[no] fc fc-name
Context
config>qos>remark
Description
This command specifies the forwarding class name and provides the context to configure the
marking value for the FC. Based on the type of remark policy created, the FC command allows the
user to specify the appropriate marking values. The fc command overrides the default parameters
for the forwarding class to the values defined.
The no form of the command removes the forwarding class lsp-exp/dot1p/dscp/dot1p-LSP-EXP
map associated with the fc. The forwarding class reverts to the defined parameters in the default
remark policy.
Default
none
Parameters
fc-name — Specifies a case-sensitive system-defined forwarding class name for which policy entries are
created.
Values
Page 394
dscp— Specifies the FC to IP DSCP values
dot1p-dscp - Specifies the FC to both 802.1 Dot1p and IP DSCP values.
be, l2, af, l1, h2, ef, h1, nc
7210 SAS-X and 7210 SAS-R6 OS Quality of Service Guide