Table of Contents
Advertisement
A remarking policy can be defined for each access egress policy and remarking is disabled by
default. Only remarking policy of type dot1p, dot1p-lsp-exp-shared, dscp or dot1p-dscp can be
used with access-egress policy.
To define a basic access egress QoS policy, the following are required:
•
•
•
Remarking by default is disabled. It can be enabled by the remarking command present under
access egress context.
Access egress QoS policy ID 1 is reserved as the default access egress policy. The default policy
cannot be deleted or changed. The default access egress policy is applied to all access ports which
do not have another access egress policy explicitly assigned. By default sap-qos-marking is
enabled. The default access-egress policy is as shown below
----------------------------------------------
*A:Dut-A>config>qos>access-egress# info detail
----------------------------------------------
----------------------------------------------
7210 SAS-X and 7210 SAS-R6 OS Quality of Service Guide
A unique service access QoS policy ID.
A QoS policy scope of template or exclusive.
A remark policy of appropriate type for based on forwarding class.
description "Default Access egress QoS policy."
no remarking
remark 2
QoS Policies
Page 57
Advertisement
Table of Contents
