By default, all slopes are shutdown and have to be explicitly enabled (no shutdown).
The no form of this command administratively enables the WRED slope.
Default
shutdown - WRED slope disabled implying a zero (0) drop probability
start-avg
Syntax
start-avg percent
no start-avg
Context
config>qos>queue-mgmt>high-slope
config>qos>queue-mgmt>low-slope
Description
This command is used to configure the starting average value.
Default
max-avg 70 — High slope default is 70% buffer utilization.
max-avg 50 — Low slope default is 50% buffer utilization.
Parameters
percent — Specifies the starting average for the high or low slopes.
Values
Page 378
0 — 100
7210 SAS-X and 7210 SAS-R6 OS Quality of Service Guide