Table 36: Network Queue Labels And Descriptions - Alcatel-Lucent 7210 SAS-R6 OS Quality Of Service Manual

Network Queue QoS Policy Commands
Show Commands
network-queue
Syntax network-queue [network-queue-policy-name] [detail]
Description
This command displays network queue policy information.
Context show>qos
Parameters
network-queue-policy-name — The name of the network queue policy.
Values
detail — Includes each queue's rates and adaptation-rule and & cbs details. It also shows FC to queue
mapping details.
Policy
Description
Associations
Queue
CIR(%)
CIR Adapt Rule
PIR(%)
PIR Adapt Rule
Port
CIR Level
PIR Weight
High Slope
Low Slope
Page 192 7210 SAS-X and 7210 SAS-R6 OS Quality of Service Guide
Valid names consist of any string up to 32 characters long composed of printable, 7-bit
ASCII characters. If the string contains special characters (#, $, spaces, etc.), the entire
string must be enclosed within double quotes.

Table 36: Network Queue Labels and Descriptions

Label
The policy name that uniquely identifies the policy.
A text string that helps identify the policy's context in the config-
uration file.
Displays the physical port identifier where the network queue
policy is applied.
Displays the queue ID.
Displays the committed information rate
Displays the adaptation rule in use
Displays the peak information rate
Displays the adaptation rule in use
Indicates if the parent scheduler is port scheduler or not
Displays the priority of the queue in the CIR loop
Displays the weight of the queue used in the PIR loop
Displays the WRED high-slope parameters
Displays the WRED low-slope parameters
Description