Table of Contents
Advertisement
Overview
Basic Configurations
A basic remark policy must confirm to the following:
•
•
•
Creating a Remark Policy
To create a new remark policy, define the following:
•
•
•
Use the following CLI syntax to configure a remark policy:
CLI Syntax:
A:7210-x>config>qos# remark 122 remark-type dscp create
The following output displays the remark policy configuration:
A:7210-x>config>qos>remark# info
----------------------------------------------
fc af
dscp-in-profile cs1
dscp-out-profile cp3
exit
fc be
dscp-in-profile nc2
dscp-out-profile af11
exit
fc ef
dscp-in-profile cp1
dscp-out-profile cp2
exit
fc h1
dscp-in-profile cp9
dscp-out-profile cp4
exit
fc h2
dscp-in-profile cp1
dscp-out-profile cp2
exit
fc l1
Page 386
Each remark policy must have a unique policy ID.
The remark policy type must be specified.
The forwarding class to egress marking values must be specified.
A remark policy name and type.
Provide a brief description of the policy features.
Specify the forwarding class to egress marking values.
7210 SAS-X and 7210 SAS-R6 OS Quality of Service Guide
Advertisement
Table of Contents
