Miscellaneous Programming; Macro Key Sequence Programming - Sam4s ER-900 Series Operation & Programming Manual

Miscellaneous Programming

Macro Key Sequence Programming

Macros are special function keys that are used to execute a sequence of key
depressions. For example, a macro might be used to execute a string of reports
To Program a Macro
To remove a Macro
If you wish to remove a key stroke from a macro, replace the current function with
the INACTIVE function.
1. Turn the control lock to the PGM position.
2. To begin the program, enter 1 5 0 0, then press the SBTL key.
1 5 0
3. Press the Macro key that you wish to program.
MACRO
4. First, you must change the Mode Key. Default Mode is PGM Mode.
Therefore, If you want to start in REG Mode, you must change Mode key
to REG Mode. Type up to 50 key stokes
Type up to 50 key strokes
5. Turn the control lock to the PGM position. Press the same Macro key to
end the sequence
MACRO
6. Repeat from step 3 - 5 to program additional macros. Then Press the
CASH key to Finish
CASH
0 SBTL
 163