System Option Programming - Sam4s ER-180U Series Operation And Programming Manual

System Option Programming

The register operation can be tailored using the following options. In order to
change each option the question is entered followed by the answer, both of
these entries are numeric and are shown on the subsequent page.
Programming a System Option:
to the PGM position
Move
•
• Enter 30 and press the SUBTOTAL key
• Enter a question number 1,2,3 etc and then press the X/TIME key
(Question and answer table shown over)
• Enter the answer and press SUBTOTAL
I.e. enter 11 X/TIME 1 SUBTOTAL to allow multiple copy receipts
Question
11
Repeat with the next question
•
Press the CASH/TEND key and return to the REG position
•
Note: See following for question and answer table
Answer Explanation
1 Allow multiple copy receipts
0
Allow only one copy receipt
*
3 0
Question No.
1 - 24
Answer
1 or 0
SUBTOTAL
X/TIME
SUBTOTAL
CASH / TEND
(=)
Program Mode • • • • 53