System Option Programming - Sam4s ER-260 Operator's And Programming Manual

System Option Programming

Thirty Four system options are provided so that you can configure the SAM4s ER-260 to your exact
requirements. Refer to the "System Option Table" on page 52 to review the system options. Read
each option carefully to determine if you wish to make any changes.
NOTE: Because after clearing memory all options settings are automatically
set to 0, and because your most likely option selections require a status setting
of 0, you do not need to program this section unless you wish to change the
default status.
Programming a System Option:
System Option Flowchart
50 • • • • Advanced Programming Instructions
1. Turn the control lock to the PGM position.
2. Enter the option number of the system option you wish to change. Press the RA key.
3. Enter the number representing the status you have selected. Press the PO key.
4. Repeat from step 3 for each system option you wish to change.
5. Press the CASH/TEND key to end programming.
Repeat for each
System Option
RA
Option #
CASH/
PO
TEND
Status
ER-260 Electronic Cash Register