Table of Contents
Advertisement
Regulatory Compliance Notices
Laser Safety
Certification and Classification Information
This product contains a laser internal to the Optical Link Module (OLM) for
connection to the Fiber communications port.
In the USA, the OLM is certified as a Class 1 laser product conforming to the
requirements contained in the Department of Health and Human Services (DHHS)
regulation 21 CFR, Subchapter J. The certification is indicated by a label on the
plastic OLM housing.
Outside the USA, the OLM is certified as a Class 1 laser product conforming to
the requirements contained in IEC 825-1:1993 and EN 60825-1:1994, including
Amendment 11:1996.
The OLM includes the following certifications:
The following figure shows the Class 1 information label that appears on the
metal cover of the OLM housing.
58
AB466A and AB467A PCI-X Host Bus Adapters for 64-Bit Windows Systems Installation Guide
WARNING:
To reduce the risk of exposure to hazardous radiation:
•
Do not try to open the laser device enclosure. There are no user-serviceable
components inside.
•
Do not operate controls, make adjustments, or perform procedures to the laser
device other than those specified herein.
•
Allow only HP authorized service technicians to repair the laser device.
UL Recognized Component (USA)
CSA Certified Component (Canada)
TUV Certified Component (European Union)
CB Certificate (Worldwide)
Advertisement
Table of Contents
