Two-Node Cluster By The S5600 Controller Subrack (Fc And Iscsi Host Ports) - Huawei OceanStor S5600 Initial Configuration Manual

OceanStor S5600 Storage System
Initial Configuration Guide
IP address of port 1 on NIC 4: 10.147.0.16
IP address of port 1 on NIC 5: 10.147.0.6
IP address of port 1 on NIC 6: 129.20.11.2
In Figure
l
l
l
l
l
l
l
l
2.2.5 Two-Node Cluster by the S5600 Controller Subrack (FC and
iSCSI Host Ports)
Introduce the networking of the two-node system cluster environment set up by the S5600
controller subrack (FC and iSCSI host ports).
When S5600 controller subrack (FC and iSCSI host ports) is set up in two-node system cluster
environment, VCS cluster software in Linux is not compatible.
Figure 2-8
+ two subnets.
Issue 02 (2009-09-30)
2-7, ports are allocated into zones as follows.
zone1: port1 and port5
zone2: port1 and port7
zone3: port2 and port6
zone4: port2 and port8
zone5: port3 and port9
zone6: port3 and port11
zone7: port4 and port10
zone8: port4 and port12
CAUTION
shows the networking of AS with two FC HBAs+three NICs&five NICs+two Fabrics
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Setting Up the Management Environment
Subnet mask: 255.255.0.0
Subnet mask: 255.255.0.0
Subnet mask: 255.255.224.0
2-15