Figure 3-20 Iscsi Initiator Properties - Huawei OceanStor S5600 Initial Configuration Manual

3 Configuring the Storage System

Figure 3-20 iSCSI initiator properties

Step 4 Choose Discovery tab. Click Add. The Add Target Portal dialog box is displayed. See
3-21.
3-30
NOTE
In Figure 3-20, click Change.... You can change the name of Initiator node in the displayed Initiator
l
Node Name Change dialog box.
The name of Initiator node contains numbers, letters, full stops, hyphens, and colons. The first character
l
cannot be a hyphen. Do not use invalid characters to name the initiator node. Otherwise, the AS fails
to connect storage devices.
For multiple ASs connected to a controller, the initiators must be named differently.
l
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
OceanStor S5600 Storage System
Initial Configuration Guide
Issue 02 (2009-09-30)
Figure