Enabling Chap Authentication; Figure 3-37 Add User - Huawei OceanStor S5600 Initial Configuration Manual

OceanStor S5600 Storage System
Initial Configuration Guide

Figure 3-37 Add user

Step 4 Select the CHAP user to be added. Click OK. The Confirm dialog box is displayed.
Step 5 Click OK. The system prompts "Operation succeeds."
----End

3.11.3 Enabling CHAP Authentication

Enable CHAP authentication for an iSCSI port.
Prerequisite
Note the following when enabling CHAP authentication:
l
l
l
Procedure
Step 1 On the OSM3.0 main interface, click Mapping. Then, in the Mapping navigation tree, click
iSCSI port. The iSCSI port interface is displayed. See
the iSCSI ports is displayed in the interface.
Step 2 Select the iSCSI port whose CHAP authentication is Available. Click Set CHAP User. The
Added CHAP User interface is displayed. See
Step 3 Click Start CHAP Authentication. The Confirm dialog box is displayed.
Step 4 Confirm the settings and enter yes. Click OK. The system prompts "Operation
succeeds."
----End
Issue 02 (2009-09-30)
Before you set a CHAP user, please make sure that you have added a port to the host.
The CHAP user of the iSCSI port is added.
The CHAP authentication status of an iSCSI port must be Available.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Configuring the Storage System
Figure 3-35. The information about all
Figure 3-36.
3-45