Table 1-1 Equipment Installation Checklist - Huawei OceanStor S5600 Initial Configuration Manual

1 Process of the Initial Configuration
Installing Hardware
When you install the support rails on the FC switch, ensure that the left and right support rails
are properly installed in correct positions. If the brackets are not flush with the bottom of the FC
switch, check whether the support rails are installed on wrong sides. Reinstall the support rails
if they are not correctly installed.
For details on how to install the S5600 controller subrack, see the OceanStor S5600 Controller
Subrack User Guide.
For details on how to install a D200 disk subrack, see the OceanStor D200 Disk Subrack User
Guide.
For details on how to install a switch, see the related product documents.
For details on how to install an AS, see the related product documents.
For details on how to install the maintenance terminal, see the related product documents.
Checking Hardware
Before checking equipment installation and cable connection, ensure that the power supply is
cut off to avoid physical injury or equipment damage due to improper installation or connection.
Check the equipment installation as instructed in the tables below.
equipment installation checklist.

Table 1-1 Equipment installation checklist

Item
S5600 controller
subrack
D200 disk subrack
1-6
CAUTION
NOTE
For details on how to install cluster software, see the related product documents.
CAUTION
Normal
The device is placed stably
without displacement.
The device is placed stably
without displacement.
NOTE
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Ensure that the setting rate of the
DIP switch on the D200 disk
subrack is the same as that of the
DIP switch on the S5600 controller
subrack.
OceanStor S5600 Storage System
Initial Configuration Guide
Table 1-1 describes the
Abnormal
The device is slanted and loosened.
The device is slanted and loosened.
Issue 02 (2009-09-30)