Linux As; Figure 3-26 Connection Status Of The Target Port - Huawei OceanStor S5600 Initial Configuration Manual

3 Configuring the Storage System
Step 10 Click OK to return to Log on to Target dialog box.
Step 11 Click OK to return to iSCSI Initiator Properties dialog box.
Step 12 In the iSCSI Initiator properties dialog box, choose Targets tab. Check that Connected is
displayed under the Status (At this time, the host can access the storage device). See
3-26.

Figure 3-26 Connection status of the target port

Step 13 Click OK.
----End

3.9.2 Linux AS

A Linux AS can connect to the controller subrack and read/write the storage data after you do
the following configuration.
3-34
NOTE
If the connection between ASs and the storage system succeeds to be set up, you can see Port Connection
Status of the AS displays Connected on the Add Port interface of the Web UI. For details, see
Adding a Port".
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
OceanStor S5600 Storage System
Initial Configuration Guide
Issue 02 (2009-09-30)
Figure
"3.10