Creating A Raid 10 Group - Huawei OceanStor S5600 Initial Configuration Manual

OceanStor S5600 Storage System
Initial Configuration Guide
Table 3-3 Parameter description of creating RAID 6
Parameter Name
Name
Level
Hard Disk Type
Step 4 Choose the free hard disks in the storage system to compose member disks in RAID 6.
When creating RAID 6, you need to choose at least four free hard disks.
Step 5 Click OK. The Confirm dialog box is displayed.
Step 6 Click OK. When the system prompts "Operation succeeded.", the operation is
complete.
----End

3.2.5 Creating a RAID 10 Group

RAID 10 is suitable for services that requires high performance and reliability, such as database
servers. RAID 10 can be created conveniently on the OSM3.0.
Procedure
Step 1 On the OSM3.0 main interface, click Service. Then, in the Service navigation tree, expand the
RAID Group node. Click RAID Group Management.
Step 2 On the right of the RAID Group Management interface, click Create RAID Group. The
Create RAID Group interface is displayed. See
Issue 02 (2009-09-30)
Parameter Description
When naming the created RAID group, note the following items:
The name of the newly-created RAID group cannot be identical to
l
that of the existing RAID group.
The name can contain letters, numbers, underscores (_), and hyphens
l
(-), and the first character cannot be a hyphen.
The name length allows 1 to 32 characters or 1 to 16 Chinese
l
characters.
Select RAID 6.
FC, SATA or SSD.
After you select a disk type, the information about the available hard
disks of this type is displayed.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Configuring the Storage System
Figure 3-6.
3-11