Configuration Process; Figure 3-1 Iinitial Configuration Flow Chart Of The S5600 Configured With Fc Host Ports - Huawei OceanStor S5600 Initial Configuration Manual

OceanStor S5600 Storage System
Initial Configuration Guide

3.1 Configuration Process

After establishing the environment of the S5600, you need to configure the system through the
OSM3.0 before accessing data. This section describes the initial configuration process of the
S5600.
Figure 3-1
ports.

Figure 3-1 Iinitial configuration flow chart of the S5600 configured with FC host ports

Create a RAID
Create a LUN
Issue 02 (2009-09-30)
shows the initial configuration flow chart of the S5600 configured with FC host
Create a host
group
Add a mapping
Log in to the AS
Use a LUN on an
NOTE
The steps enclosed by dashed lines should be performed after you log in to the AS. The other steps are
performed on the OSM3.0.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Start
Log in to the
OSM3.0
Set the FC host ports
group
Add a host
Add a port
AS
End
3 Configuring the Storage System
of the controllers
3-3