Figure 4-10 Modify Short Message; Table 4-2 Parameters For Modifying The Short Message Information - Huawei OceanStor S5600 Initial Configuration Manual

4 Setting Additional Information
Step 2 Click Modify. The Modify Short Message interface is displayed. See

Figure 4-10 Modify Short Message

Step 3 Enter the modified information.
Table 4-2

Table 4-2 Parameters for modifying the short message information

Parameter
Send or Not
Country
Sending-Alarm
Severity
Sending
Channel of
Controller A
Sending
Channel of
Controller B
Short Message
Center Number
4-12
describes the parameters for modifying the short message information.
Description
Indicates whether to enable the function of sending alarm short messages
to mobile phones.
Indicates the country where the short message center is. Currently, the
country can be China or America.
Indicates the severity of the alarms to be notified. The options are Critical,
Major, Minor, and Warning.
Indicates whether to enable the function of sending alarm short messages
on the serial port of controller A. Only when the channel status is Open,
the alarm short message can be sent through the serial port. In the
meantime, the debugging function of the serial port is disabled.
Indicates whether to enable the function of sending short messages
notifying alarms through the serial port of controller B. Only when the
channel status is Open, the alarm short message can be sent through the
serial port. In the meantime, the debugging function of the serial port is
disabled.
Indicates the number of the short message center. The number ranges from
0 to 9. In addition, you must add "+" and the country code before the
number, for example, +8613000000000.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
OceanStor S5600 Storage System
Initial Configuration Guide
Figure 4-10.
Issue 02 (2009-09-30)