Overview Of The Initial Configuration - Huawei OceanStor S5600 Initial Configuration Manual

1 Process of the Initial Configuration

1.1 Overview of the Initial Configuration

The initial configuration of the storage system is the basis for services. This document describes
the process of the initial configuration of the S5600.
The initial configuration of the S5600 consists of the following operations:
l
l
l
l
l
l
l
l
Figure 1-1
1-2
Planning the networking
Installing and checking the hardware
Configuring the NICs or FC HBA for the ASs
Setting up the management environment
Setting the IP address of the management network port on the controller
Logging in to the OSM3.0
Configuring the storage system
Setting additional information
NOTE
NIC: network interface card
l
FC: fiber channel
l
HBA: host bus adapter
l
AS: application server
l
IP: Internet Protocol
l
OSM: OceanStor storage manager
l
shows the steps of the S5600 initial configuration.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
OceanStor S5600 Storage System
Initial Configuration Guide
Issue 02 (2009-09-30)