OceanStor S5600 Storage System
Initial Configuration Guide
Figure 4-1 System Information
Step 2 Click Change Device Name. The Change Device Name interface is displayed. See
4-2.
Figure 4-2 Change Device Name
Step 3 Enter a name for the iSCSI device and then click OK. The Confirm dialog box is displayed.
Step 4 Enter yes. Click OK. The system displays "Operation succeeds".
----End
4.1.2 Modifying the Name and the Location
The system name indicates the system functions and the location indicates the physical addresses
of storage devices.
Issue 02 (2009-09-30)
NOTE
When the system is upgraded or in safe mode, the Current System Mode parameter is not displayed in
the System Information interface.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Setting Additional Information
Figure
4-3