Figure 3-16 Fc Host Port; Figure 3-17 Modifying The Rate Of The Fc Host Ports - Huawei OceanStor S5600 Initial Configuration Manual

3 Configuring the Storage System
When you set the rate of an FC host port through the OSM3.0, ensure that the rate of the FC
host port is the same as that of the FC HBA port. Otherwise, the communication may fail. In
addition, to ensure the optimal port performance, you are recommended to set the rate to the
maximum value that both parties support.
Procedure
Step 1 On the OSM3.0 main interface, click Device. Expand the Controller Subrack 00 node in the
Device navigation tree and then choose FC Host Port. The FC Host Port page is displayed,
as shown in

Figure 3-16 FC host port

Step 2 Select an FC host port (for example, host port 00 on controller A). Click Modify Rate. The
Modify Rate page is displayed, as shown in

Figure 3-17 Modifying the rate of the FC host ports

3-26
Figure 3-16.
NOTE
For the relationship between the FC host port on a controller and the FC host port number in
3-16, see Figure 2-2.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
OceanStor S5600 Storage System
Figure 3-17.
Initial Configuration Guide
Figure
Issue 02 (2009-09-30)