Figure 3-13 Iscsi Host Port; Figure 3-14 Ip Configuration - Huawei OceanStor S5600 Initial Configuration Manual

OceanStor S5600 Storage System
Initial Configuration Guide

Figure 3-13 iSCSI Host Port

Step 2 Select Address 10 (for example host port 10 on controller A). Click IP Configuration. The IP
Configuration interface is displayed. See

Figure 3-14 IP Configuration

Step 3 Set the parameters of the iSCSI host port.
port.
Issue 02 (2009-09-30)
NOTE
In Figure 3-13, configuring IP address for the iSCSI host port makes sense only when the link status of
the iSCSI host port is Connected.
NOTE
For the relationship between the iSCSI host port on a controller and the number of the iSCSI host ports
l
in Figure 3-13, see Figure
In Figure 3-13, choose an IP address and then click IP Clear, the IP address and subnet mask configured
l
previously can be cleared.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2-3.
Figure 3-14.
Table 3-8 describes the parameters of an iSCSI host
3 Configuring the Storage System
3-23