Creating A Raid 5 Group; Figure 3-4 Creating A Raid 5 Group; Table 3-2 Parameters For Creating A Raid 5 Group - Huawei OceanStor S5600 Initial Configuration Manual

OceanStor S5600 Storage System
Initial Configuration Guide
Step 6 Click OK. The system prompts "Operation succeeds."
----End

3.2.3 Creating a RAID 5 Group

RAID 5 is suitable for services that has certain requirements on performance and reliability,
such as web and E-mail servers. RAID 5 can be created conveniently on the OSM3.0.
Procedure
Step 1 On the OSM3.0 main interface, click Service. Then, in the Service navigation tree, expand the
RAID Group node. Click RAID Group Management.
Step 2 On the right of the RAID Group Management interface, click Create RAID Group. The
Create RAID Group interface is displayed. See

Figure 3-4 Creating a RAID 5 group

Step 3 Enter the parameters for creating a RAID 5 group.
creating a RAID 5 group.

Table 3-2 Parameters for creating a RAID 5 group

Parameter
Name
Level
Issue 02 (2009-09-30)
Description
This parameter indicates the name of the RAID group. Note the following
when you set the parameter.
The name must be unique.
l
The name can contain letters, numbers, underscores (_), and hyphens
l
(-), and the first character cannot be a hyphen.
The name contains 1 to 32 characters.
l
Select RAID 5.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Configuring the Storage System
Figure 3-4.
Table 3-2 describes the parameters for
3-9