Configuring The Storage System; Setting Additional Information - Huawei OceanStor S5600 Initial Configuration Manual

OceanStor S5600 Storage System
Initial Configuration Guide
l
Procedure
Step 1 Run the IE on the maintenance terminal.
Step 2 Enter https://XXX.XXX.XXX.XXX:8443 on the address bar of the IE. XXX.XXX.XXX.XXX
represents the IP address of the management network port.
Step 3 Press Enter or click Go. The OSM3.0 login interface is displayed.
Step 4 Select a language from language.
Step 5 Enter a user name in user.
Step 6 Enter the password in password.
Step 7 Press Enter or click Login.
----End

1.8 Configuring the Storage System

Introduce how to configure the S5600 storage system.
For details on the initial configuration of the S5600, see
System" .

1.9 Setting Additional Information

Introduce how to set additional information for the S5600.
For details on how to set additional information about the S5600, see
Information" .
Issue 02 (2009-09-30)
In the same period, the OSM3.0 allows one admin user to log in only. If no operation is
performed in ten minutes after you log in to the OSM3.0, you will log out automatically.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
1 Process of the Initial Configuration
"3 Configuring the Storage
"4 Setting Additional
1-21