Setting A Chap User; Figure 3-34 Create Chap User; Table 3-12 Parameters Of The Chap User - Huawei OceanStor S5600 Initial Configuration Manual

OceanStor S5600 Storage System
Initial Configuration Guide

Figure 3-34 Create CHAP user

Step 3 Enter CHAP user information.

Table 3-12 Parameters of the CHAP user

Parameter
User Name
User Password
Confirm User
Password
Step 4 Click OK. The Confirm dialog box is displayed.
Step 5 Click OK. The system prompts "Operation succeeds."
----End

3.11.2 Setting a CHAP User

Set a CHAP user for an iSCSI port.
Prerequisite
Before setting a CHAP user for an iSCSI port, you must have successfully created a CHAP user
and set the iSCSI port.
Issue 02 (2009-09-30)
Table 3-12
Description
Specifies the name of the CHAP user. The CHAP user name can
l
contain only letters, numbers and underlines (_) and hyphens (-). Its
first character must be a letter. The length of the CHAP user name
is 4–25 characters.
The name must be unique.
l
Specifies the password of the CHAP user. The length of this password
is 12–16 characters.
Confirms the CHAP user password. This password must be consistent
with the user password. Its length is 12–16 characters.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
3 Configuring the Storage System
describes the parameters of the CHAP user.
3-43