Removing And Installing Release Lever - Volkswagen Passat 2011 Workshop Manual

Passat 2011 ➤ , Passat Variant 2011 ➤
General body repairs, exterior - Edition 06.2019
1.12

Removing and installing release lever

1.12.1 Removing
– Pull release lever -1- to release bonnet.
– Insert a small screwdriver in gap between release lever -1- and
clip -2-.
– Withdraw clip -2- from release lever -1- and remove release
lever.
1.12.2 Installing
– Push clip -2- completely into release lever -1-.
– Then slide release lever -1- onto mounting in bearing bracket
and engage.
• Before closing bonnet, check function of release lever and
Bowden cable.
36
Rep. gr.55 - Bonnet, rear lid