Printing A Graphic Without Printing Postage; Printing Postage On A Label; Adding A Custom Text Message - Pitney Bowes SendPro C User Manual

8. Select the graphic you want from the list.
9. Tap Apply.
10. Insert the envelope into the device to verify that the envelope prints correctly.

Printing a graphic without printing postage

Print a graphic without printing postage, such as the Received graphic on incoming mail.
1. Tap Envelope Printing on the Home screen.
2. Tap Print Mode.
3. Select Graphic Only.
4. Tap Apply.
5. Tap Graphic.
6. Tap Graphics, then select your graphic.
7. Confirm with Apply.
8. Print the graphic on the envelope or tape.

Printing postage on a label

Print postage on a label if you need to send a parcel or an envelope that is too large to fit through the
device.
1. Tap Envelope Printing on the Home screen.
2. Tap Account and select an account if accounting is enabled on your device.
3. Tap Class.
4. Tap Start Over to show a list of all the available classes.
5. Tap the desired class for your mail.
6. Tap Apply.
7. Place the parcel on the scale. The weight appears.
8. Insert the label into the device. The device prints the postage.

Adding a custom text message

Add a text message to print a return address or to print your own personalised message. Your
message must comply with the postal rules for your country.
Your message can be up to five lines, with 20 characters per line. The message prints on the left side
of the envelope.
Pitney Bowes User Guide November 2021
8 • Printing
64