Adding A Custom Text Message; Printing A Graphic Without Printing Postage - Pitney Bowes SendPro C Auto User Manual

8. Select the graphic you want from the list.
9. Tap Apply.
10. Place the envelope on the feed deck. Depending on the SendPro C model you have, feed the
envelopes manually or tap Start to verify that the envelope prints correctly.

Adding a custom text message

Add a text message to print a return address or to print your own personalised message. Your
message must comply with the postal rules for your country.
Your message can be up to five lines, with 20 characters per line. The message prints on the left side
of the envelope.
1. Tap Print on Envelopes on the Home screen.
2. Weigh your envelope, select a class, and select special services, if required.
3. Tap Graphic +.
4. Tap Custom Text.
5. Tap + Add.
6. Tap Accept & Continue to comply with the postal rules.
7. Enter a name for the message. The name can be up to 20 characters.
8. Tap Save.
9. Enter the message, line by line.
10. Tap Apply twice.
11. Place the envelope or envelopes on the feed deck. Depending on the SendPro C model you
have, feed the envelopes manually or tap Start to feed the envelopes.

Printing a graphic without printing postage

Print a graphic without printing postage, such as the Received graphic on incoming mail.
1. Tap Print on Envelopes on the Home screen.
2. Tap Print Mode.
3. Select Graphic Only.
4. Tap Apply.
5. Tap Graphic.
6. Tap Graphics, then select your graphic.
7. Confirm with Apply.
8. Print the graphic on the envelope or tape.
Pitney Bowes User Guide December 2023
9 • Printing
77