Programming With Specialized Proste Software - Teletek electronics ECLIPSE 16 Engineer Programming Manual

Eclipse 8/ 16/ 32 Series - Engineer Programming Manual
Table of the symbols and codes correspondence:
032 040 048 056 064
033 041 049 057 065
034 042 050 058 066
035 043 051 059 067
036 044 052 060 068
037 045 053 061 069
038 046 054 062 070
039 047 055 063 071
Example: To enter the „asterisk" symbol, first press the MEMORY button (a solid cursor appears on the place)
and after that enter code 042. The asterisk symbol will appear and the cursor will move one position to the
right.
3.
PROGRAMMING
ProsTE is specialized software for direct programming of burglary and fire alarm panels manufactured by Teletek
Electronics JSC.
The programming of ECLIPSE Series control panels is via serial connection using specialized "cable ProsTE". It is
strongly recommended as a first step to read the set to control panel parameters, as second – changing parameters
and at the end – writing the new settings to the control panel.
A detailed description for the operation with ProsTE software is provided in the built-in help files.
Eclipse 8/ 16
Serial connection between the ECLIPSE 8 / 16/ 32 and PC with ProsTE software
072 080 088 096 104 112
073 081 089 097 105 113
074 082 090 098 106 114
075 083 091 099 107 115
076 084 092 100 108 116
077 085 093 101 109 117
078 086 094 102 110 118
079 087 095 103 111 119
WITH SPECIALIZED ProsTE SOFTWARE
120 160 168 176 184
121 161 169 177 185
122 162 170 178 186
123 163 171 179 187
124 164 172 180 188
125 165 173 181 189
126 166 174 182 190
127 167 175 183 191
14
192 200 208 216 224 232
193 201 209 217 225 233
194 202 210 218 226 234
195 203 211 219 227 235
196 204 212 220 228 236
197 205 213 221 229 237
198 206 214 222 230 238
199 207 215 223 231 239
240 248
241 249
242 250
243 251
244 252
245 253
246 254
247 255