General Information For Operation With Led8/ 16A - Teletek electronics ECLIPSE 16 Engineer Programming Manual

Eclipse 8/ 16/ 32 Series - Engineer Programming Manual

2.5. General Information for Operation with LED8/ 16A

LED8/ 16A are a compact size keyboards with LED display, suitable for management and programming of ECLIPSE
Series control panels. The keyboards have indication for 8/ 16 zones and can control one 1/ 3 area.
LED8/ 16A are equipped with specialized LED indication for informing the installer of the set programming style menu
and specific visualization of the programming values and parameters.
The entering of codes, 3- and 4-digit addresses and values is with the digit buttons. For arming the system are used
the quick buttons for the respective arming mode.
Specialized LED indication for LED8/ 16A keyboard:
LED Indication Description
Lights on The system is in engineer or manager programming mode.
Blinking Shows a selected device in an engineer programming mode.
The 3-digit programming style type is selected.
Lights on View mode (of OPERATION number) after pressing the DISARM button.
[O] is short from OPERATION.
The 4-digit programming style type is selected.
Lights on View mode (of ADDRESS number) after pressing the DISARM button.
[A] is short from ADDRESS.
The system waits for entering of setting of a parameter, or option.
Lights on
[V] is short from VALUE.
Lights off No active alarms in the system.
Lights on Alarm in the system. The active alarms are reviewed by pressing the ENTER button.
Blinking View mode for active alarms.
Lights off No system troubles in the system.
Lights on System trouble. The active troubles are reviewed by pressing the ENTER button.
Blinking View mode for system troubles.
Lights off No bypassed zones in the system.
Lights on Bypassed zones in the system. The zone numbers are reviewed by pressing the ENTER button.
View mode – The numbers of bypassed zones are lighting on.
Blinking
In normal operation mode the DISARM button (LED8) or Area Letters (LED 16A) light on in green. The DISARM button
has a specific functionality in engineer programming menus.
Note: The button DISARM
Button Functionality
DISARM
INFORMATION
used in the previous design of the keyboard and has the same functionality!
Description
System disarming.
Information about the ADDRESS number in engineer programming mode. The
functionality is useful when the installer is confused during the engineer programming
and wants to check up the current ADDRESS number before continue with the
respective parameter or option settings.
The button is used in the following way:
1. The symbols and
zone(s), according the type of the programmed parameter. A blinking digit shows that
parameter which is in setting mode, and lighting on digit button shows the current set
value for this parameter.
2. To find out what is the number of the current ADDRESS, press the
the set programming style is with 4-digit ADDRESSES – the
is with 3-digit operations - the
are lighting on permanently together with a number of
symbol lights on. The zone numbers from 1 to 4 or
10
button. If
symbol lights on, and if it