Teletek electronics ECLIPSE 16 Engineer Programming Manual page 43

ADDRESS
Z1 AUX
OPERATION
TEXT MENU
Setting of Auxiliary Attributes for Zone 01
At this address are assigned only attributes for Auxiliary type zone.
Only one attribute AUX can be assigned at this address - a number from 0 to 9. To assign an AUX
attribute press the respective digital number. The entered attribute is confirmed with ENTER.
The following Attributes are available for setting at this address:
No
0 24h Burglary alarm
zone
AC loss
1
2 Battery low
3 Water leakage
4 Gas detector
GSM link trouble
5
6 Low Bottled Gas Level
7 High Temperature
8 Low Temperature
9 Loss of Heat
Default setting: 0. 24h Burglary
ADDRESS
Z1 NAME
OPERATION
TEXT MENU
Programming of the Zone 01 Name
The engineer can enter a new name for Zone 01 at this address. The name has to be up 16
symbols – letters (small and capital), digits and special symbols, including spaces.
The letters can be entered directly by the digit buttons. The cursor moves automatically to the right
after choosing of letter or digit, or may be moved manually by the arrows. To enter a digit, press the
respective button and hold it for 2-3 seconds. See also item 2.8. Entering text for LCD Keyboard.
Confirm the new zone name with ENTER button.
Default name: Zone 01
2017
217 + 01
4. INPUTS – 5. ZONES – 01. ZONE – 7. AUXILIARY
Attribute
With this attribute assigned, the zone will be active irrespective
of the arming type. The zone will operate as SLEEP type and
the programmable ALARM and SIREN outputs, and the system
communicator will be activated.
Main power supply lost.
Low battery charging level.
Activated flood detector.
Activated gas detector.
GSM communication failure.
Activated low bottled gas detector.
High temperature in the premises.
Low temperature in the premises.
Loss of heat in the premises.
2018
218 + 01
4. INPUTS – 5. ZONES – 01. ZONE – 8. NAME
Eclipse 8/ 16/ 32 Series - Engineer Programming Manual
Description
43