Teletek electronics ECLIPSE 16 Engineer Programming Manual page 32

Eclipse 8/ 16/ 32 Series - Engineer Programming Manual
ADDRESS
U1 T.SLOT
OPERATION
TEXT MENU
Programming of time slot for User code 01
An access code timeslot is set.
The valid timeslot numbers are from 1 to 8. If the selected access code is not to be restricted by a
timeslot, enter 0.
Use the digit buttons to enter the timeslot number. The entered number is confirmed with ENTER.
For programming of timeslots, see for details Menu. 5 Timeslot Programming.
Default settings: 0
User codes form 02 to 08/ 32/ 64 are programmed in an analogical way.
The rights of User codes set at addresses 1хх0 (110 + хх), where "xx" is a user number from 02 to 08/ 32/ 64, can be
enabled or disabled according the system settings:
ADDRESS
Uxx
OPERATION
OPTIONS
TEXT MENU
User xx Operation rights
The following options are assigned for the User xx Code:
1. DISARM
2. PART ARM
Partial arming
3. BYPASS
Zone
Bypassing
4. PROGRAM
5. N.A
6. N.A
7. N.A
8. MANAGER
MANAGER in
the system
When the option 8. MANAGER is enabled, it is obligatory to enable and option 4. PROGRAM!
To disable/ enable all user operation rights press button "0" – the button alternatively switches over
all enabled / all disabled state.
Default settings:
User codes
1014
114+01
3. CODES – 1. USERS – 01. USER – 5.TIMESLOT
1xx0
110+xx
3. CODES – 1. USERS – xx. USER – 1. OPTIONS
DISARMING the site:
DISARM ENABLE (1) – the user code has right to disarm the site
DISARM DISABLE () – the user code has not right to disarm the site
Partial arming STAY or SLEEP type:
PART ARM ENABLE (2) – the user code has right to realize partial arming
STAY or SLEEP type
PART ARM DISABLE () – the user code has not right to realize partial arming
STAY or SLEEP type
Bypassing zones in the site:
BYPASS ENABLE (3) – the user code has right to bypass zones
BYPASS DISABLE () – the user code has not right to bypass zones
Programming – change own code, reviewing the memory log, enabling/
disabling the "chime" sound signalization, zone bypassing:
PROGRAM ENABLE (4) – the user code can realize programming
PROGRAM DISABLE () - the user code cannot realize programming
Manager in the system – can program user codes and rights in the system,
reviewing the memory log, zone bypassing:
MANAGER ENABLE (8) – the code has Manager rights
MANAGER DISABLE () – the code has not Manager rights
ECLIPSE 8
01 1, 2, 3, 4
02-08 1, 2

09-32

33-64
ECLIPSE 16 ECLIPSE 32
1, 2, 3, 4 1, 2, 3, 4, 8
1, 2
1, 2

32